com.amazonaws.services.cloudwatchevents

Interface AmazonCloudWatchEvents

All Known Subinterfaces:

AmazonCloudWatchEventsAsync

All Known Implementing Classes:

AbstractAmazonCloudWatchEvents, AbstractAmazonCloudWatchEventsAsync, AmazonCloudWatchEventsAsyncClient, AmazonCloudWatchEventsClient

public interface AmazonCloudWatchEvents

Interface for accessing Amazon CloudWatch Events.

Amazon CloudWatch Events helps you to respond to state changes in your AWS resources. When your resources change state they automatically send events into an event stream. You can create rules that match selected events in the stream and route them to targets to take action. You can also use rules to take action on a pre-determined schedule. For example, you can configure rules to:

• Automatically invoke an AWS Lambda function to update DNS entries when an event notifies you that Amazon EC2 instance enters the running state.
• Direct specific API records from CloudTrail to an Amazon Kinesis stream for detailed analysis of potential security or availability risks.
• Periodically invoke a built-in target to create a snapshot of an Amazon EBS volume.

For more information about Amazon CloudWatch Events features, see the Amazon CloudWatch Developer Guide.

Method Summary

Methods

Modifier and Type	Method and Description
void	deleteRule(DeleteRuleRequest deleteRuleRequest) Deletes a rule.
DescribeRuleResult	describeRule(DescribeRuleRequest describeRuleRequest) Describes the details of the specified rule.
void	disableRule(DisableRuleRequest disableRuleRequest) Disables a rule.
void	enableRule(EnableRuleRequest enableRuleRequest) Enables a rule.
ResponseMetadata	getCachedResponseMetadata(AmazonWebServiceRequest request) Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected.
ListRuleNamesByTargetResult	listRuleNamesByTarget(ListRuleNamesByTargetRequest listRuleNamesByTargetRequest) Lists the names of the rules that the given target is put to.
ListRulesResult	listRules(ListRulesRequest listRulesRequest) Lists the Amazon CloudWatch Events rules in your account.
ListTargetsByRuleResult	listTargetsByRule(ListTargetsByRuleRequest listTargetsByRuleRequest) Lists of targets assigned to the rule.
PutEventsResult	putEvents(PutEventsRequest putEventsRequest) Sends custom events to Amazon CloudWatch Events so that they can be matched to rules.
PutRuleResult	putRule(PutRuleRequest putRuleRequest) Creates or updates a rule.
PutTargetsResult	putTargets(PutTargetsRequest putTargetsRequest) Adds target(s) to a rule.
RemoveTargetsResult	removeTargets(RemoveTargetsRequest removeTargetsRequest) Removes target(s) from a rule so that when the rule is triggered, those targets will no longer be invoked.
void	setEndpoint(String endpoint) Overrides the default endpoint for this client ("events.us-east-1.amazonaws.com").
void	setRegion(Region region) An alternative to setEndpoint(String), sets the regional endpoint for this client's service calls.
void	shutdown() Shuts down this client object, releasing any resources that might be held open.
TestEventPatternResult	testEventPattern(TestEventPatternRequest testEventPatternRequest) Tests whether an event pattern matches the provided event.

Method Detail

setEndpoint

void setEndpoint(String endpoint)

Overrides the default endpoint for this client ("events.us-east-1.amazonaws.com"). Callers can use this method to control which AWS region they want to work with.

Callers can pass in just the endpoint (ex: "events.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "events.us-east-1.amazonaws.com"). If the protocol is not specified here, the default protocol from this client's ClientConfiguration will be used, which by default is HTTPS.

For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available endpoints for all AWS services, see: http://developer.amazonwebservices.com/connect/entry.jspa?externalID= 3912

This method is not threadsafe. An endpoint should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.

Parameters:

endpoint - The endpoint (ex: "events.us-east-1.amazonaws.com") or a full URL, including the protocol (ex: "events.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will communicate with.

setRegion

void setRegion(Region region)

An alternative to setEndpoint(String), sets the regional endpoint for this client's service calls. Callers can use this method to control which AWS region they want to work with.

By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the ClientConfiguration supplied at construction.

This method is not threadsafe. A region should be configured when the client is created and before any service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit or retrying.

Parameters:

region - The region this client will communicate with. See Region.getRegion(com.amazonaws.regions.Regions) for accessing a given region. Must not be null and must be a region where the service is available.

See Also:

Region.getRegion(com.amazonaws.regions.Regions), Region.createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration), Region.isServiceSupported(String)

deleteRule

void deleteRule(DeleteRuleRequest deleteRuleRequest)

Deletes a rule. You must remove all targets from a rule using RemoveTargets before you can delete the rule.

Note: When you delete a rule, incoming events might still continue to match to the deleted rule. Please allow a short period of time for changes to take effect.

Parameters:

deleteRuleRequest - Container for the parameters to the DeleteRule operation.

Throws:

ConcurrentModificationException - This exception occurs if there is concurrent modification on rule or target.

InternalException - This exception occurs due to unexpected causes.

describeRule

DescribeRuleResult describeRule(DescribeRuleRequest describeRuleRequest)

Describes the details of the specified rule.

Parameters:

describeRuleRequest - Container for the parameters to the DescribeRule operation.

Returns:

Result of the DescribeRule operation returned by the service.

Throws:

ResourceNotFoundException - The rule does not exist.

InternalException - This exception occurs due to unexpected causes.

disableRule

void disableRule(DisableRuleRequest disableRuleRequest)

Disables a rule. A disabled rule won't match any events, and won't self-trigger if it has a schedule expression.

Note: When you disable a rule, incoming events might still continue to match to the disabled rule. Please allow a short period of time for changes to take effect.

Parameters:

disableRuleRequest - Container for the parameters to the DisableRule operation.

Throws:

ResourceNotFoundException - The rule does not exist.

ConcurrentModificationException - This exception occurs if there is concurrent modification on rule or target.

InternalException - This exception occurs due to unexpected causes.

enableRule

void enableRule(EnableRuleRequest enableRuleRequest)

Enables a rule. If the rule does not exist, the operation fails.

Note: When you enable a rule, incoming events might not immediately start matching to a newly enabled rule. Please allow a short period of time for changes to take effect.

Parameters:

enableRuleRequest - Container for the parameters to the EnableRule operation.

Throws:

ResourceNotFoundException - The rule does not exist.

ConcurrentModificationException - This exception occurs if there is concurrent modification on rule or target.

InternalException - This exception occurs due to unexpected causes.

listRuleNamesByTarget

ListRuleNamesByTargetResult listRuleNamesByTarget(ListRuleNamesByTargetRequest listRuleNamesByTargetRequest)

Lists the names of the rules that the given target is put to. You can see which of the rules in Amazon CloudWatch Events can invoke a specific target in your account. If you have more rules in your account than the given limit, the results will be paginated. In that case, use the next token returned in the response and repeat ListRulesByTarget until the NextToken in the response is returned as null.

Parameters:

listRuleNamesByTargetRequest - Container for the parameters to the ListRuleNamesByTarget operation.

Returns:

Result of the ListRuleNamesByTarget operation returned by the service.

Throws:

InternalException - This exception occurs due to unexpected causes.

listRules

ListRulesResult listRules(ListRulesRequest listRulesRequest)

Lists the Amazon CloudWatch Events rules in your account. You can either list all the rules or you can provide a prefix to match to the rule names. If you have more rules in your account than the given limit, the results will be paginated. In that case, use the next token returned in the response and repeat ListRules until the NextToken in the response is returned as null.

Parameters:

listRulesRequest - Container for the parameters to the ListRules operation.

Returns:

Result of the ListRules operation returned by the service.

Throws:

InternalException - This exception occurs due to unexpected causes.

listTargetsByRule

ListTargetsByRuleResult listTargetsByRule(ListTargetsByRuleRequest listTargetsByRuleRequest)

Lists of targets assigned to the rule.

Parameters:

listTargetsByRuleRequest - Container for the parameters to the ListTargetsByRule operation.

Returns:

Result of the ListTargetsByRule operation returned by the service.

Throws:

ResourceNotFoundException - The rule does not exist.

InternalException - This exception occurs due to unexpected causes.

putEvents

PutEventsResult putEvents(PutEventsRequest putEventsRequest)

Sends custom events to Amazon CloudWatch Events so that they can be matched to rules.

Parameters:

putEventsRequest - Container for the parameters to the PutEvents operation.

Returns:

Result of the PutEvents operation returned by the service.

Throws:

InternalException - This exception occurs due to unexpected causes.

putRule

PutRuleResult putRule(PutRuleRequest putRuleRequest)

Creates or updates a rule. Rules are enabled by default, or based on value of the State parameter. You can disable a rule using DisableRule.

Note: When you create or update a rule, incoming events might not immediately start matching to new or updated rules. Please allow a short period of time for changes to take effect.

A rule must contain at least an EventPattern or ScheduleExpression. Rules with EventPatterns are triggered when a matching event is observed. Rules with ScheduleExpressions self-trigger based on the given schedule. A rule can have both an EventPattern and a ScheduleExpression, in which case the rule will trigger on matching events as well as on a schedule.

Note: Most services in AWS treat : or / as the same character in Amazon Resource Names (ARNs). However, CloudWatch Events uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.

Parameters:

putRuleRequest - Container for the parameters to the PutRule operation.

Returns:

Result of the PutRule operation returned by the service.

Throws:

InvalidEventPatternException - The event pattern is invalid.

LimitExceededException - This exception occurs if you try to create more rules or add more targets to a rule than allowed by default.

ConcurrentModificationException - This exception occurs if there is concurrent modification on rule or target.

InternalException - This exception occurs due to unexpected causes.

putTargets

PutTargetsResult putTargets(PutTargetsRequest putTargetsRequest)

Adds target(s) to a rule. Targets are the resources that can be invoked when a rule is triggered. For example, AWS Lambda functions, Amazon Kinesis streams, and built-in targets. Updates the target(s) if they are already associated with the role. In other words, if there is already a target with the given target ID, then the target associated with that ID is updated.

In order to be able to make API calls against the resources you own, Amazon CloudWatch Events needs the appropriate permissions. For AWS Lambda and Amazon SNS resources, CloudWatch Events relies on resource-based policies. For Amazon Kinesis streams, CloudWatch Events relies on IAM roles. For more information, see Permissions for Sending Events to Targets in the Amazon CloudWatch Developer Guide.

Input and InputPath are mutually-exclusive and optional parameters of a target. When a rule is triggered due to a matched event, if for a target:

• Neither Input nor InputPath is specified, then the entire event is passed to the target in JSON form.
• InputPath is specified in the form of JSONPath (e.g. $.detail), then only the part of the event specified in the path is passed to the target (e.g. only the detail part of the event is passed).
• Input is specified in the form of a valid JSON, then the matched event is overridden with this constant.

Note: When you add targets to a rule, when the associated rule triggers, new or updated targets might not be immediately invoked. Please allow a short period of time for changes to take effect.

Parameters:

putTargetsRequest - Container for the parameters to the PutTargets operation.

Returns:

Result of the PutTargets operation returned by the service.

Throws:

ResourceNotFoundException - The rule does not exist.

ConcurrentModificationException - This exception occurs if there is concurrent modification on rule or target.

LimitExceededException - This exception occurs if you try to create more rules or add more targets to a rule than allowed by default.

InternalException - This exception occurs due to unexpected causes.

removeTargets

RemoveTargetsResult removeTargets(RemoveTargetsRequest removeTargetsRequest)

Removes target(s) from a rule so that when the rule is triggered, those targets will no longer be invoked.

Note: When you remove a target, when the associated rule triggers, removed targets might still continue to be invoked. Please allow a short period of time for changes to take effect.

Parameters:

removeTargetsRequest - Container for the parameters to the RemoveTargets operation.

Returns:

Result of the RemoveTargets operation returned by the service.

Throws:

ResourceNotFoundException - The rule does not exist.

ConcurrentModificationException - This exception occurs if there is concurrent modification on rule or target.

InternalException - This exception occurs due to unexpected causes.

testEventPattern

TestEventPatternResult testEventPattern(TestEventPatternRequest testEventPatternRequest)

Tests whether an event pattern matches the provided event.

Note: Most services in AWS treat : or / as the same character in Amazon Resource Names (ARNs). However, CloudWatch Events uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event you want to match.

Parameters:

testEventPatternRequest - Container for the parameters to the TestEventPattern operation.

Returns:

Result of the TestEventPattern operation returned by the service.

Throws:

InvalidEventPatternException - The event pattern is invalid.

InternalException - This exception occurs due to unexpected causes.

shutdown

void shutdown()

Shuts down this client object, releasing any resources that might be held open. This is an optional method, and callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client has been shutdown, it should not be used to make any more requests.

getCachedResponseMetadata

ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request)

Returns additional metadata for a previously executed successful request, typically used for debugging issues where a service isn't acting as expected. This data isn't considered part of the result data returned by an operation, so it's available through this separate, diagnostic interface.

Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic information for an executed request, you should use this method to retrieve it as soon as possible after executing a request.

Parameters:

request - The originally executed request.

Returns:

The response metadata for the specified request, or null if none is available.